19.01.2022

Which are the most common types of flanges used in piping? How do they look like? The key types of flanges are the welding neck, long welding neck, slip-on flanges, socket weld, lap joint, threaded and blind flanges. In addition to these standard flanges, some special ones exist, called Weldoflange/Nipoflange and Elboflange, swivel flange, expander/reducer flange, and orifice flanges.


STANDARD TYPES OF FLANGES

The type of flange to be used for a piping application depends, mainly, on the required strength for the flanged joint. Flanges are used, alternatively to welded connections, to facilitate maintenance operations (a flanged joint can be dismantled quickly and conveniently).


Let’s now dive in, showing the key types of flanges with pictures.


WELDING NECK FLANGE


STANDARD TYPES OF FLANGES

The type of flange to be used for a piping application depends, mainly, on the required strength for the flanged joint. Flanges are used, alternatively to welded connections, to facilitate maintenance operations (a flanged joint can be dismantled quickly and conveniently).


Let’s now dive in, showing the key types of flanges with pictures.


WELDING NECK FLANGE


Long weld neck flanges (“LWN”) are similar to welding neck flanges, with the exception that the neck (tapered hub) is extended and acts like a boring extension.


Long weld neck flanges are generally used on vessels, columns or barrels. These flange types are available also in the heavy barrel (HB) and equal barrel (E) types.

SLIP ON FLANGE


A slip-on flange is connected to the pipe or the fittings by two fillet welds, one executed inside and one outside the cavity of the flange.


The bore size of a slip-on flange is larger than the outside diameter of the connecting pipe, as the pipe has to slide inside the flange to be connected by the execution of a fillet weld.


Slip-on flanges are also defined “Hubbed Flanges” and they are easy to recognize due to their slim and compact shape.


The dimensions and weights of slip-on flanges ANSI/ASME are available on this page.


WELD NECK VS SLIP ON FLANGE


Flanged joints made with slip-on flanges are, in the long run, a bit more fragile than connections made with welding neck flanges (in similar service conditions). This seems due to the following facts:


a welding neck flange features a tapered hub, absent in a socket weld flange, which distributes the mechanical stress between the pipe and the flange more evenly

a welding neck joint as only one welding area instead of two (socket weld flange).

Another advantage of the welding neck flange is that it can be connected either to pipes and fittings, whereas socket weld flanges suit pipes only.


THREADED FLANGE


Threaded flanges are joined to pipes by screwing the pipe (which has a male thread, generally NPT per ASME B1.20.1) onto the flange, without seam welds (in certain cases, though, small welds are applied to increase the strength of the connection).


Threaded flanges are available in sizes up to 4 inches and multiple pressure ratings, however, they are used, mostly, small size piping in low pressure and low-temperature applications, like water and air utility services.


Threaded flanges are also a mandatory requirement in explosive areas, such as gas stations and plants, as the execution of welded connections in such environments would be dangerous.


Consult this article, to find about the dimension of ANSI/ASME threaded flanges.


SOCKET WELD FLANGE


Socket weld flanges are connected to pipes using a single fillet weld executed on the outer side of the flange (different from the slip-on flange type that requires two welds).

According to ASME B31.1, to execute a flanged connection using a socket weld flange, the pipe shall be at first inserted in the socket of the flange until it reaches the bottom of the flange, then it should be lifted by 1.6 mm and finally welded.


This gap shall be left to allow proper positioning of the pipe inside the flange socket after the solidification of the weld.


Socket Weld Flanges are used for small-size and high-pressure piping that do not transfer highly corrosive fluids.


This due to the fact that these flange types are subject to corrosion in the gap area between the end of the pipe and the shoulder of the socket.


Their static strength of socket weld flanges is similar to slip-on flanges’, but their fatigue strength is higher due to the presence of a single, instead of double, fillet weld.


LAP JOINT FLANGE


Lap joint flanges feature a flat face and are always used in conjunction with a stub end.


Lap joint flanges resemble, in shape, slip-on flanges except for the radius at the crossing of the flange face and the bore to accommodate the flanged portion of the stub end.


A lap joint flange slips over the pipe and seats on the back of the stub end and the two are kept together by the pressure of the bolts.


The use of lap joint flanges in combination with stub ends is a cost-effective solution for stainless steel or nickel alloy pipelines, as the material of the lap joint flange can be of a lower grade (generally carbon steel) than the material of the stub end (which has to match the pipe grade, as in contact with the conveyed fluid).


This arrangement, therefore, has these two advantages:


reduces the overall cost of the pipeline’s flanged joints, as the use of higher grade materials is minimized;

bolting operations are simplified, as the lap joint flange can be rotated around the pipe to help with bolts alignment.

The dimensions and weights of lap joint flanges are shown in this article.


BLIND FLANGE

Contrary to all the flange types seen above, blind flanges do not have a center hole, and are used to blind or seal a pipeline, a valve/pressure vessel and block the flow of the fluid.


Blind flanges have to withstand remarkable mechanical stress due to the system pressure and the required bolting forces.


Blind flanges allow easy access to the pipeline, as they can be easily unbolted to let the operator execute activities inside the terminal end of the pipe (this is also the reason why the blind flange type is used as manhole for pressure vessels, at times).


It is maybe interesting to observe that, while this flanges type is easier to manufacture, they are sold at a premium average cost per kilogram compared to the other flange types.

keine Angabe